Threadless Baguette With Dangle Spike Attachment

Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

Black PVD Titanium Internally Threaded Attachment 0.9mm (16G)

• Size: 10.5mm x 3.9mm
  

Internally Threaded Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)

PVD (Vacuum coating), also known as thin-film deposition, is a vacuum chamber process whereby a very thin and steady layer of coating is applied to the surface of a substrate, protecting it from forces that might wear it down or decrease its efficiency.

PVD Coating isn’t adding another layer to the object that will chip or crack with time (think old paint). It’s impregnating the object.

Black titanium nitride applied via PVD coating is becoming a standard for medical tools. The coating reduces friction, provides biocompatibility for implants, is antimicrobial, and it serves as a chemical barrier for those with a sensitivity to nickel (which can often be found in the tool).

As opposed to other coatings that chip, crack, and wear down, vacuum coatings are a shining armor for your jewelry, providing a strong and thin coating for a variety of applications.  

Unlike paints which other companies use and many other methods, this technique is body-friendly so it can be used safely and without a problem.

Black PVD Titanium Internally Threaded 3 Prong Set Black Crystal Attachment 0.9mm (16G)

• Size: 6.5mm x 2.6mm
  

Internally Threaded Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)

PVD (Vacuum coating), also known as thin-film deposition, is a vacuum chamber process whereby a very thin and steady layer of coating is applied to the surface of a substrate, protecting it from forces that might wear it down or decrease its efficiency.

PVD Coating isn’t adding another layer to the object that will chip or crack with time (think old paint). It’s impregnating the object.

Black titanium nitride applied via PVD coating is becoming a standard for medical tools. The coating reduces friction, provides biocompatibility for implants, is antimicrobial, and it serves as a chemical barrier for those with a sensitivity to nickel (which can often be found in the tool).

As opposed to other coatings that chip, crack, and wear down, vacuum coatings are a shining armor for your jewelry, providing a strong and thin coating for a variety of applications.  

Unlike paints which other companies use and many other methods, this technique is body-friendly so it can be used safely and without a problem.

Black PVD Titanium Internally Threaded Moon Attachment 0.9mm (16G)

• Size: 5.1mm x 3.9mm
  

Internally Threaded Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)

PVD (Vacuum coating), also known as thin-film deposition, is a vacuum chamber process whereby a very thin and steady layer of coating is applied to the surface of a substrate, protecting it from forces that might wear it down or decrease its efficiency.

PVD Coating isn’t adding another layer to the object that will chip or crack with time (think old paint). It’s impregnating the object.

Black titanium nitride applied via PVD coating is becoming a standard for medical tools. The coating reduces friction, provides biocompatibility for implants, is antimicrobial, and it serves as a chemical barrier for those with a sensitivity to nickel (which can often be found in the tool).

As opposed to other coatings that chip, crack, and wear down, vacuum coatings are a shining armor for your jewelry, providing a strong and thin coating for a variety of applications.  

Unlike paints which other companies use and many other methods, this technique is body-friendly so it can be used safely and without a problem.

Black PVD Titanium Internally Threaded Spike Attachment 0.9mm (16G)

• Size: 3.0mm x 3.0mm
  

Internally Threaded Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)

PVD (Vacuum coating), also known as thin-film deposition, is a vacuum chamber process whereby a very thin and steady layer of coating is applied to the surface of a substrate, protecting it from forces that might wear it down or decrease its efficiency.

PVD Coating isn’t adding another layer to the object that will chip or crack with time (think old paint). It’s impregnating the object.

Black titanium nitride applied via PVD coating is becoming a standard for medical tools. The coating reduces friction, provides biocompatibility for implants, is antimicrobial, and it serves as a chemical barrier for those with a sensitivity to nickel (which can often be found in the tool).

As opposed to other coatings that chip, crack, and wear down, vacuum coatings are a shining armor for your jewelry, providing a strong and thin coating for a variety of applications.  

Unlike paints which other companies use and many other methods, this technique is body-friendly so it can be used safely and without a problem.

Black PVD Titanium Internally Threaded Lightning Bolt Attachment 0.9mm (16G)

• Size: 8.3mm x 3.4mm
  

Internally Threaded Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)

PVD (Vacuum coating), also known as thin-film deposition, is a vacuum chamber process whereby a very thin and steady layer of coating is applied to the surface of a substrate, protecting it from forces that might wear it down or decrease its efficiency.

PVD Coating isn’t adding another layer to the object that will chip or crack with time (think old paint). It’s impregnating the object.

Black titanium nitride applied via PVD coating is becoming a standard for medical tools. The coating reduces friction, provides biocompatibility for implants, is antimicrobial, and it serves as a chemical barrier for those with a sensitivity to nickel (which can often be found in the tool).

As opposed to other coatings that chip, crack, and wear down, vacuum coatings are a shining armor for your jewelry, providing a strong and thin coating for a variety of applications.  

Unlike paints which other companies use and many other methods, this technique is body-friendly so it can be used safely and without a problem.

Black PVD Titanium Internally Threaded Triangle Black Jewel Attachment 0.9mm (16G)

• Size: 4.0mm x 3.5mm
  

Internally Threaded Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)

PVD (Vacuum coating), also known as thin-film deposition, is a vacuum chamber process whereby a very thin and steady layer of coating is applied to the surface of a substrate, protecting it from forces that might wear it down or decrease its efficiency.

PVD Coating isn’t adding another layer to the object that will chip or crack with time (think old paint). It’s impregnating the object.

Black titanium nitride applied via PVD coating is becoming a standard for medical tools. The coating reduces friction, provides biocompatibility for implants, is antimicrobial, and it serves as a chemical barrier for those with a sensitivity to nickel (which can often be found in the tool).

As opposed to other coatings that chip, crack, and wear down, vacuum coatings are a shining armor for your jewelry, providing a strong and thin coating for a variety of applications.  

Unlike paints which other companies use and many other methods, this technique is body-friendly so it can be used safely and without a problem.

Black PVD Titanium Internally Threaded Jeweled 3 Stone Bar Attachment 0.9mm (16G)

• Size: 4.8mm x 1.6mm
  

Internally Threaded Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)

PVD (Vacuum coating), also known as thin-film deposition, is a vacuum chamber process whereby a very thin and steady layer of coating is applied to the surface of a substrate, protecting it from forces that might wear it down or decrease its efficiency.

PVD Coating isn’t adding another layer to the object that will chip or crack with time (think old paint). It’s impregnating the object.

Black titanium nitride applied via PVD coating is becoming a standard for medical tools. The coating reduces friction, provides biocompatibility for implants, is antimicrobial, and it serves as a chemical barrier for those with a sensitivity to nickel (which can often be found in the tool).

As opposed to other coatings that chip, crack, and wear down, vacuum coatings are a shining armor for your jewelry, providing a strong and thin coating for a variety of applications.  

Unlike paints which other companies use and many other methods, this technique is body-friendly so it can be used safely and without a problem.

Black PVD Titanium Internally Threaded Smooth Snake Attachment 0.9mm (16G)

• Size: 6.8mm x 4.4mm
  

Internally Threaded Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)

PVD (Vacuum coating), also known as thin-film deposition, is a vacuum chamber process whereby a very thin and steady layer of coating is applied to the surface of a substrate, protecting it from forces that might wear it down or decrease its efficiency.

PVD Coating isn’t adding another layer to the object that will chip or crack with time (think old paint). It’s impregnating the object.

Black titanium nitride applied via PVD coating is becoming a standard for medical tools. The coating reduces friction, provides biocompatibility for implants, is antimicrobial, and it serves as a chemical barrier for those with a sensitivity to nickel (which can often be found in the tool).

As opposed to other coatings that chip, crack, and wear down, vacuum coatings are a shining armor for your jewelry, providing a strong and thin coating for a variety of applications.  

Unlike paints which other companies use and many other methods, this technique is body-friendly so it can be used safely and without a problem.

Internally Threaded Jewel Palm Tree Attachment

• Size: 6.4mm x 7.3mm
  

Internally Threaded Titanium Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)

Internally Threaded Deer Attachment

• Size: 5.4mm x 8.0mm
  

Internally Threaded Titanium Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)

Internally Threaded Heart w Trio Marquise Attachment

• Size: 4.0mm x 6.2mm
  

Internally Threaded Titanium Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)

Internally Threaded Jewel Fox Attachment

• Size: 5.9mm x 6.2mm
  

Internally Threaded Titanium Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)

Internally Threaded Opal Star Attachment

• Size: 7.0mm x 5.2mm
  

Internally Threaded Titanium Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)

Internally Threaded Jewel Cat Ears Attachment

• Size: 6.7mm x 4.8mm
  

Internally Threaded Titanium Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)

Internally Threaded Elephant Attachment

• Size: 5.8mm x 5.1mm
  

Internally Threaded Titanium Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)

Threadless Trio Marquise Attachment

• Size: 8.2mm x 3.4mm

Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

24kt Gold PVD Titanium Internally Threaded Square Jewel Attachment 0.9mm (16G)

• Size: 4.8mm x 7.6mm

Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)

PVD (Vacuum coating), also known as thin-film deposition, is a vacuum chamber process whereby a very thin and steady layer of coating is applied to the titanium surface of a substrate, protecting it from forces that might wear it down or decrease its efficiency.

PVD Coating isn’t adding another layer to the object that will chip or crack with time (think old paint).

PVD coating is becoming a standard for medical tools. The coating reduces friction, provides biocompatibility for implants, is antimicrobial, and it serves as a chemical barrier for those with a sensitivity to nickel (which can often be found in the tool).

As opposed to other coatings that chip, crack, and wear down, vacuum coatings are a shining armor for your jewelry, providing a strong and thin coating for a variety of applications.  

Unlike paints which other companies use and many other methods, this technique is body-friendly so it can be used safely and without a problem.

Internally Threaded Jewel Dinosaur Attachment

• Size: 9.5mm x 5.3mm
  

Internally Threaded Titanium Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)

14kt Gold Dangle Moon Navel Bar

Made out of Solid 14kt Gold Nickel Free.

Bar Gauge: 1.6mm / 14GA     Length: 10mm

• Crystal Size: 1.3mm x 2pcs
• Crystal Size: 1.2mm x 2pcs
• Crystal Size: 1.1mm x 2pcs
  
• Crystal Size: 0.9mm x 2pcs
  
• Crystal Size: 2.0mm x 1pcs
  
• Crystal Size: 2.5mm x 1pcs
  

This 14kt gold navel bar dangle moon is the perfect addition for your jewelry collection. Crafted from solid 14kt gold, this piece offers superior shine and a polished look that lasts. Add a touch of sophistication to your style and experience the look of luxurious gold.

14kt Gold Prong Set Dangle Navel Bar

Made out of Solid 14kt Gold Nickel Free.

Bar Gauge: 1.6mm / 14GA     Length: 10mm

• Crystal Size: 6.0mm - 1pcs
• Crystal Size: 2.5mm - 1pcs
• Prong Size: 5mm x 3mm - 1pcs
  

Crafted with solid 14kt gold, this navel bar prong set dangle offers long-lasting durability and radiant shine. It features a classic design and secure closure for a secure and stylish look.

14kt Gold Opal Pear Shape Prong Set Navel Bar

Made out of Solid 14kt Gold Nickel Free.

Bar Gauge: 1.6mm / 14GA     Length: 10mm

• Opal Size: 2.5mm x 1pcs
• Opal Size: 7.5mm x 1pcs

This stunning 14kt gold navel bar with opal pear shape prong set is perfect for making a bold statement. The 14kt gold ensures the jewelry is strong and durable. The opal pear shape boosts the beauty of the piece and the prong setting provides a secure fit to your body.

14kt Gold Single Prong Set Navel Bar

Made out of Solid 14kt Gold Nickel Free.

Bar Gauge: 1.6mm / 14GA     Length: 10mm

• Crystal Size: 2.5mm x 1pcs
• Crystal Size: 6.0mm x 1pcs

The 14kt Gold Navel Bar Single Prong Set is a chic and classy choice for navel jewelry. Featuring a single prong design and crafted from a high-polish 14 karat gold finish, this style is ideal for navel piercings and will make any look shine.

14kt Gold Pear Prong Set Navel Bar

Made out of Solid 14kt Gold Nickel Free.

Bar Gauge: 1.6mm / 14GA     Length: 10mm

• Crystal Size: 2.5mm - 1pcs
• Pear Size: 6.0mm x 4.0mm - 1pcs

This 14kt gold Navel Bar Pear Prong Set will add a touch of luxurious style to your look. Crafted from 14kt gold, this navel piercing features a pear-labelled charm expertly set with a prong setting that will add a classic look to any outfit.

14kt Gold Heart Prong Set Navel Bar

Made out of Solid 14kt Gold Nickel Free.

Bar Gauge: 1.6mm / 14GA     Length: 10mm

• Crystal Size: 2.5mm x 1pcs
• Heart Size: 6.0mm x 1pcs

This 14kt Gold Navel Bar Heart Prong Set is the perfect addition to any outfit. Crafted from 14kt gold, it guarantees durability and shines for any occasion. Its prong setting ensures strength and shine for a sophisticated look and a heart shaped centerpiece adds a classic touch.

14kt Gold Double Prong Set Navel Bar

Made out of Solid 14kt Gold Nickel Free.

Bar Gauge: 1.6mm / 14GA     Length: 10mm

• Crystal Size: 4.0mm x 1pcs
• Crystal Size: 6.0mm x 1pcs

This 14kt Gold Navel Bar Double Prong Set is an elegant and timeless piece of body jewelry. Crafted from high-quality gold, the double prong set provides a secure fit and is hypoallergenic. This navel bar is an excellent choice for a touch of luxury.

14kt Gold Jewel Hinged Ring

Made out of Solid 14kt Gold Nickel Free.

• Crystal Size: 1.0mm x 14pcs

This stunning 14kt gold hinge ring is sure to make a statement. The 14kt gold jewelled design adds sophistication and elegance to any ensemble. The ring is designed to be comfortable and secure, making it perfect for any dress code or occasion.

14kt Gold Front Facing Jewel Hinged Ring

Made out of Solid 14kt Gold Nickel Free.

• Crystal Size: 1.0mm x 13pcs

This 14kt Gold Front Facing Jewel Hinge Ring is sure to be a conversation starter. Beautifully crafted with front facing crystals in 14kt solid gold, this stunning accessory is a timeless piece. Enjoy the luxurious look and feel of this modern classic.

14kt Gold Tear with Jewel Hinged Ring

Made out of Solid 14kt Gold Nickel Free.

Bar Gauge: 1.2mm / 16GA     Length: 8mm

• Crystal Size: 2.75mm x 1pcs

This 14kt Gold Tear Hinge Ring with Jewel is the perfect accessory for any look. The ring is crafted with care from durable 14kt gold, and features a beautiful and intricate jewel for added sparkle. Feel confident knowing that you are wearing a quality piece of jewelry that will last for many years.

14kt Gold Paved Crystals With Blue Stones Hinged Ring

Made out of Solid 14kt Gold Nickel Free.

Bar Gauge: 1.2mm / 16GA     Length: 8mm

• Crystal Size: 1.1mm x 13pcs
• Turquoise Size: 1.3mm x 11pcs

Make a statement with this stunning 14kt gold hinge ring featuring individually set crystals and turquoise stones. The intricate details of the design add an elegant touch to your look. A quality and durable construction ensures this piece lasts for years to come.

14kt Gold Paved with Paved Prong Set Hinged Ring

Made out of Solid 14kt Gold Nickel Free.

Bar Gauge: 1.2mm / 16GA     Length: 8mm

• Crystal Size: 1.1mm x 15pcs
• Crystal Size: 1.0mm x 14pcs

This 14kt gold ring is the perfect addition to any jewelry collection. 29 stones are prong set in a unique and eye-catching design. The hinge detail adds a delicate touch, making this ring a timeless piece.

14kt Gold 7 Prong Set Hinged Ring

Made out of Solid 14kt Gold Nickel Free.

Bar Gauge: 1.2mm / 16GA     Length: 8mm

• Crystal Size: 2.0mm x 1pcs
• Crystal Size: 1.75mm x 2pcs
• Crystal Size: 1.3mm x 4pcs

This 14kt Gold 7 Prong Set Hinge Ring is a stunning piece of jewelry. Crafted from 14kt gold, its 7 prongs are set to shine and make a statement. Perfect for any special occasion or as an everyday piece, this sophisticated ring will be a treasured part of your collection.