Trident Body Jewelry
Threadless Baguette With Dangle Spike Attachment
Trident Titanium Threadless 3 Baguette Stone Attachment
Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)
Threadless Jewelry Method:
Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:
- Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
- Slightly bend the insertion pin within the bar.
- Push the end into the shaft and test the fit.
Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.
Black Titanium Internal Sword Attachment
Black Titanium Internal Sword Attachment
-
Size: 10.5mm x 3.9mm
Internally Threaded Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)
PVD (Vacuum coating), also known as thin-film deposition, is a vacuum chamber process whereby a very thin and steady layer of coating is applied to the surface of a substrate, protecting it from forces that might wear it down or decrease its efficiency.
PVD Coating isn’t adding another layer to the object that will chip or crack with time (think old paint). It’s impregnating the object.
Black titanium nitride applied via PVD coating is becoming a standard for medical tools. The coating reduces friction, provides biocompatibility for implants, is antimicrobial, and it serves as a chemical barrier for those with a sensitivity to nickel (which can often be found in the tool).
As opposed to other coatings that chip, crack, and wear down, vacuum coatings are a shining armor for your jewelry, providing a strong and thin coating for a variety of applications.
Unlike paints which other companies use and many other methods, this technique is body-friendly so it can be used safely and without a problem.
Black Titanium Internal Threaded 3 Prong Set Black Crystal
Black Titanium Internal Threaded 3 Prong Set Black Crystal
-
Size: 6.5mm x 2.6mm
Internally Threaded Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)
PVD (Vacuum coating), also known as thin-film deposition, is a vacuum chamber process whereby a very thin and steady layer of coating is applied to the surface of a substrate, protecting it from forces that might wear it down or decrease its efficiency.
PVD Coating isn’t adding another layer to the object that will chip or crack with time (think old paint). It’s impregnating the object.
Black titanium nitride applied via PVD coating is becoming a standard for medical tools. The coating reduces friction, provides biocompatibility for implants, is antimicrobial, and it serves as a chemical barrier for those with a sensitivity to nickel (which can often be found in the tool).
As opposed to other coatings that chip, crack, and wear down, vacuum coatings are a shining armor for your jewelry, providing a strong and thin coating for a variety of applications.
Unlike paints which other companies use and many other methods, this technique is body-friendly so it can be used safely and without a problem.
Black Titanium Internal Moon Attachment
Black Titanium Internal Moon Attachment
-
Size: 5.1mm x 3.9mm
Internally Threaded Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)
PVD (Vacuum coating), also known as thin-film deposition, is a vacuum chamber process whereby a very thin and steady layer of coating is applied to the surface of a substrate, protecting it from forces that might wear it down or decrease its efficiency.
PVD Coating isn’t adding another layer to the object that will chip or crack with time (think old paint). It’s impregnating the object.
Black titanium nitride applied via PVD coating is becoming a standard for medical tools. The coating reduces friction, provides biocompatibility for implants, is antimicrobial, and it serves as a chemical barrier for those with a sensitivity to nickel (which can often be found in the tool).
As opposed to other coatings that chip, crack, and wear down, vacuum coatings are a shining armor for your jewelry, providing a strong and thin coating for a variety of applications.
Unlike paints which other companies use and many other methods, this technique is body-friendly so it can be used safely and without a problem.
Black Titanium Internal Threaded Spike
Black Titanium Internal Threaded Spike
-
Size: 3.0mm x 3.0mm
Internally Threaded Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)
PVD (Vacuum coating), also known as thin-film deposition, is a vacuum chamber process whereby a very thin and steady layer of coating is applied to the surface of a substrate, protecting it from forces that might wear it down or decrease its efficiency.
PVD Coating isn’t adding another layer to the object that will chip or crack with time (think old paint). It’s impregnating the object.
Black titanium nitride applied via PVD coating is becoming a standard for medical tools. The coating reduces friction, provides biocompatibility for implants, is antimicrobial, and it serves as a chemical barrier for those with a sensitivity to nickel (which can often be found in the tool).
As opposed to other coatings that chip, crack, and wear down, vacuum coatings are a shining armor for your jewelry, providing a strong and thin coating for a variety of applications.
Unlike paints which other companies use and many other methods, this technique is body-friendly so it can be used safely and without a problem.
Black Titanium Internal Bolt Attachment
Black Titanium Internal Bolt Attachment
-
Size: 8.3mm x 3.4mm
Internally Threaded Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)
PVD (Vacuum coating), also known as thin-film deposition, is a vacuum chamber process whereby a very thin and steady layer of coating is applied to the surface of a substrate, protecting it from forces that might wear it down or decrease its efficiency.
PVD Coating isn’t adding another layer to the object that will chip or crack with time (think old paint). It’s impregnating the object.
Black titanium nitride applied via PVD coating is becoming a standard for medical tools. The coating reduces friction, provides biocompatibility for implants, is antimicrobial, and it serves as a chemical barrier for those with a sensitivity to nickel (which can often be found in the tool).
As opposed to other coatings that chip, crack, and wear down, vacuum coatings are a shining armor for your jewelry, providing a strong and thin coating for a variety of applications.
Unlike paints which other companies use and many other methods, this technique is body-friendly so it can be used safely and without a problem.
Black Titanium Internal Triangle Black Jewel Attachment
Black Titanium Internal Triangle Black Jewel Attachment
-
Size: 4.0mm x 3.5mm
Internally Threaded Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)
PVD (Vacuum coating), also known as thin-film deposition, is a vacuum chamber process whereby a very thin and steady layer of coating is applied to the surface of a substrate, protecting it from forces that might wear it down or decrease its efficiency.
PVD Coating isn’t adding another layer to the object that will chip or crack with time (think old paint). It’s impregnating the object.
Black titanium nitride applied via PVD coating is becoming a standard for medical tools. The coating reduces friction, provides biocompatibility for implants, is antimicrobial, and it serves as a chemical barrier for those with a sensitivity to nickel (which can often be found in the tool).
As opposed to other coatings that chip, crack, and wear down, vacuum coatings are a shining armor for your jewelry, providing a strong and thin coating for a variety of applications.
Unlike paints which other companies use and many other methods, this technique is body-friendly so it can be used safely and without a problem.
Black Titanium Internal Jewelled 3 Stone Bar Attachment
Black Titanium Internal Jewelled 3 Stone Bar Attachment
-
Size: 4.8mm x 1.6mm
Internally Threaded Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)
PVD (Vacuum coating), also known as thin-film deposition, is a vacuum chamber process whereby a very thin and steady layer of coating is applied to the surface of a substrate, protecting it from forces that might wear it down or decrease its efficiency.
PVD Coating isn’t adding another layer to the object that will chip or crack with time (think old paint). It’s impregnating the object.
Black titanium nitride applied via PVD coating is becoming a standard for medical tools. The coating reduces friction, provides biocompatibility for implants, is antimicrobial, and it serves as a chemical barrier for those with a sensitivity to nickel (which can often be found in the tool).
As opposed to other coatings that chip, crack, and wear down, vacuum coatings are a shining armor for your jewelry, providing a strong and thin coating for a variety of applications.
Unlike paints which other companies use and many other methods, this technique is body-friendly so it can be used safely and without a problem.
Black Titanium Internal Smooth Snake Attachment
Black Titanium Internal Smooth Snake Attachment
-
Size: 6.8mm x 4.4mm
Internally Threaded Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)
PVD (Vacuum coating), also known as thin-film deposition, is a vacuum chamber process whereby a very thin and steady layer of coating is applied to the surface of a substrate, protecting it from forces that might wear it down or decrease its efficiency.
PVD Coating isn’t adding another layer to the object that will chip or crack with time (think old paint). It’s impregnating the object.
Black titanium nitride applied via PVD coating is becoming a standard for medical tools. The coating reduces friction, provides biocompatibility for implants, is antimicrobial, and it serves as a chemical barrier for those with a sensitivity to nickel (which can often be found in the tool).
As opposed to other coatings that chip, crack, and wear down, vacuum coatings are a shining armor for your jewelry, providing a strong and thin coating for a variety of applications.
Unlike paints which other companies use and many other methods, this technique is body-friendly so it can be used safely and without a problem.
Internal Thread Jewel Palm Tree
Internal Thread Jewel Palm Tree
-
Size: 6.4mm x 7.3mm
Internally Threaded Titanium Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)
Internal Thread Deer Attachment
Internal Thread Deer Attachment
-
Size: 5.4mm x 8.0mm
Internally Threaded Titanium Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)
Internal Thread Heart w Trio Marquise
Internal Thread Heart w Trio Marquise
-
Size: 4.0mm x 6.2mm
Internally Threaded Titanium Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)
Internal Thread Jewel Fox Attachment
Internal Thread Jewel Fox Attachment
-
Size: 5.9mm x 6.2mm
Internally Threaded Titanium Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)
Internal Threaded Opal Star Attachment
Internal Threaded Opal Star Attachment
-
Size: 7.0mm x 5.2mm
Internally Threaded Titanium Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)
Internal Threaded Attachment Jewel Cat Ears
Internal Threaded Attachment Jewel Cat Ears
-
Size: 6.7mm x 4.8mm
Internally Threaded Titanium Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)
Internal Threaded Elephant Attachment
Internal Threaded Elephant Attachment
-
Size: 5.8mm x 5.1mm
Internally Threaded Titanium Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)
Threadless Attachment Trio Marquise
Threadless Attachment Trio Marquise
- Size: 8.2mm x 3.4mm
Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)
Threadless Jewelry Method:
Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:
- Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
- Slightly bend the insertion pin within the bar.
- Push the end into the shaft and test the fit.
Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.
Internal Threaded 24kt Gold PVD Square Jewel
Internal Threaded 24kt Gold PVD Square Jewel
- Size: 4.8mm x 7.6mm
Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)
Internal Threaded Jewel Dinosaur Attachment
Internal Threaded Jewel Dinosaur Attachment
-
Size: 9.5mm x 5.3mm
Internally Threaded Titanium Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)
14kt Gold Jewel Hinge Ring
14kt Gold Jewel Hinge Ring
Made out of Solid 14kt Gold Nickel Free.
- Crystal Size: 1.0mm x 14pcs
This stunning 14kt gold hinge ring is sure to make a statement. The 14kt gold jewelled design adds sophistication and elegance to any ensemble. The ring is designed to be comfortable and secure, making it perfect for any dress code or occasion.
14kt Gold Front Facing Jewel Hinge Ring
14kt Gold Front Facing Jewel Hinge Ring
Made out of Solid 14kt Gold Nickel Free.
- Crystal Size: 1.0mm x 13pcs
This 14kt Gold Front Facing Jewel Hinge Ring is sure to be a conversation starter. Beautifully crafted with front facing crystals in 14kt solid gold, this stunning accessory is a timeless piece. Enjoy the luxurious look and feel of this modern classic.
14kt Gold Tear Hinge Ring with Jewel
14kt Gold Tear Hinge Ring with Jewel
Made out of Solid 14kt Gold Nickel Free.
Bar Gauge: 1.2mm / 16GA Length: 8mm
- Crystal Size: 2.75mm x 1pcs
This 14kt Gold Tear Hinge Ring with Jewel is the perfect accessory for any look. The ring is crafted with care from durable 14kt gold, and features a beautiful and intricate jewel for added sparkle. Feel confident knowing that you are wearing a quality piece of jewelry that will last for many years.
14kt Gold Hinge Ring Paved Crystals With Blue Stones
14kt Gold Hinge Ring Paved Crystals With Blue Stones
Made out of Solid 14kt Gold Nickel Free.
Bar Gauge: 1.2mm / 16GA Length: 8mm
- Crystal Size: 1.1mm x 13pcs
- Turquoise Size: 1.3mm x 11pcs
Make a statement with this stunning 14kt gold hinge ring featuring individually set crystals and turquoise stones. The intricate details of the design add an elegant touch to your look. A quality and durable construction ensures this piece lasts for years to come.
14kt Gold Paved Hinge Ring with Paved Prong Set
14kt Gold Paved Hinge Ring with Paved Prong Set
Made out of Solid 14kt Gold Nickel Free.
Bar Gauge: 1.2mm / 16GA Length: 8mm
- Crystal Size: 1.1mm x 15pcs
- Crystal Size: 1.0mm x 14pcs
This 14kt gold ring is the perfect addition to any jewelry collection. 29 stones are prong set in a unique and eye-catching design. The hinge detail adds a delicate touch, making this ring a timeless piece.
14kt Gold 7 Prong Set Hinge Ring
14kt Gold 7 Prong Set Hinge Ring
Made out of Solid 14kt Gold Nickel Free.
Bar Gauge: 1.2mm / 16GA Length: 8mm
- Crystal Size: 2.0mm x 1pcs
- Crystal Size: 1.75mm x 2pcs
- Crystal Size: 1.3mm x 4pcs
This 14kt Gold 7 Prong Set Hinge Ring is a stunning piece of jewelry. Crafted from 14kt gold, its 7 prongs are set to shine and make a statement. Perfect for any special occasion or as an everyday piece, this sophisticated ring will be a treasured part of your collection.
14kt Gold Pave Hinged Tear
14kt Gold Pave Hinged Tear
Made out of Solid 14kt Gold Nickel Free.
Bar Gauge: 1.2mm / 16GA Length: 8mm
- Crystal Size: 1.75mm x 1pcs
- Crystal Size: 1.5mm x 2pcs
- Crystal Size: 1.3mm x 2pcs
- Crystal Size: 1.0mm x 6pcs
This classic 14kt gold hinged tear ring is adorned with pave-set crystals for a unique and shimmering look. Crafted in premium gold, it is sure to be the perfect addition to any jewelry collection.
14kt Gold Hinge Ring 5 Prong Set Jewel
14kt Gold Hinge Ring 5 Prong Set Jewel
Made out of Solid 14kt Gold Nickel Free.
Bar Gauge: 1.2mm / 16GA Length: 8mm
- Crystal Size: 2.25mm x 1pc
- Crystal Size: 2.00mm x 2pc
- Crystal Size: 1.75mm x 2pcs
This sophisticated 14kt gold hinge ring with 5 prong set crystals will add a timeless and eye-catching look to your accessory collection. Crafted from solid gold, the ring features a secure and durable construction to ensure it withstands the test of time. Ideal for daily wear, this elegant piece of jewelry is a must-have for any jewelry aficionado.
14kt Gold Threadless - 3 Petal Marquise
14kt Gold Threadless - 3 Petal Marquise Made out of Nickle free solid 14kt Gold & implant grade steel pin.
Piece Size: Super Small & Delicate Length / 2.1mm - Width / 3.5mm
Crystal Size: 0.9mm
Pin Gauge: 0.42mm / Length: 4mm*
Threadless Jewelry Method:
Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:
- Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
- Slightly bend the insertion pin within the bar.
- Push the end into the shaft and test the fit.
Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.
14kt Gold Threadless - Duck
14kt Gold Threadless - Duck Made out of Nickle free solid 14kt Gold & implant grade steel pin.
Piece Size: Length / 4.1mm - Width / 4.0mm
Crystal Size: 0.9mm
Pin Gauge: 0.42mm / Length: 4mm*
Threadless Jewelry Method:
Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:
- Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
- Slightly bend the insertion pin within the bar.
- Push the end into the shaft and test the fit.
Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.
14kt Gold Threadless - Cross
14kt Gold Threadless - Cross Made out of Nickle free solid 14kt Gold & implant grade steel pin.
Piece Size: Length / 3.9mm - Width / 2.1mm
Pin Gauge: 0.42mm / Length: 4mm*
Threadless Jewelry Method:
Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:
- Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
- Slightly bend the insertion pin within the bar.
- Push the end into the shaft and test the fit.
Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.
14kt Gold Threadless - Aten
14kt Gold Threadless - Aten Made out of Nickle free solid 14kt Gold & implant grade steel pin.
Piece Size: Length / 6.0mm - Width / 5.0mm
Pin Gauge: 0.42mm / Length: 4mm*
Threadless Jewelry Method:
Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:
- Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
- Slightly bend the insertion pin within the bar.
- Push the end into the shaft and test the fit.
Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.
14kt Gold Threadless - Penguin
14kt Gold Threadless - Penguin Made out of Nickle free solid 14kt Gold & implant grade steel pin.
Piece Size: Length / 5.8mm - Width / 4.1mm
Pin Gauge: 0.42mm / Length: 4mm*
Threadless Jewelry Method:
Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:
- Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
- Slightly bend the insertion pin within the bar.
- Push the end into the shaft and test the fit.
Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.