14kt Gold Threadless - Olina - Left                                                                                        Made out of Nickle free solid 14kt Gold & implant grade steel pin. Olina is designed for the left ear but also versatile for multiple placements. Featured with a .9mm gold bar wrapping around to the rear. A 1.75mm round stone sits above the gold bar. Running adjacent a gold chain drop hanging 17.9mm. A unique design with elegance and sophistication.      

Piece Size:  Length / 17.9mm  -  Width / 6.7mm 

Pin Gauge: 0.42mm / Length: 4mm*

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

14kt Gold Earring With 5 Prong Set Princess Crystals - Issa Right                                            Made out of solid 14kt Yellow Gold Nickle Free on a hinge clasp. Designed around 5 prong set 2mm princess cut crystals along a 1mm solid gold band. Issa is petit and elegant.

Piece Size:  Length / 11.3mm -  Width / 11.3mm 

Bar Gauge: 0.80mm / 20GA     Length 6mm                                                                      Internal Ring Size - 8.8mm

14kt Gold Earring With 5 Prong Set Princess Crystals - Issa Left                                                Made out of solid 14kt Yellow Gold Nickle Free on a hinge clasp. Designed around 5 prong set 2mm princess cut crystals along a 1mm solid gold band. Issa is petit and elegant.

Piece Size:  Length / 11.3mm -  Width / 11.3mm 

Bar Gauge: 0.80mm / 20GA     Length 6mm                                                                      Internal Ring Size - 8.8mm

14kt Gold Earring - Alva                                                                                                              Made out of solid 14kt Yellow Gold Nickle Free on a hinge clasp. Alva is a solid gold 1.55mm thick ring with a drop hanging 30mm solid gold bar.

Piece Size:  Length / 11.75mm -  Width / 11.75mm 

Bar Gauge: 0.80mm / 20GA     Length 5.2mm                                                                      Internal Ring Size 9.4mm

14kt Gold Earring With 5 Prong Set Crystals - Yana                                                                  Made out of solid 14kt Yellow Gold Nickle Free on a hinge clasp. Yana is a petit earing with five 1.7mm prong set crystals front facing followed by a 1.4mm gold band towards the rear.

Piece Size: Length / 8.7mm - Width / 8.7mm

Bar Gauge: 0.70mm / 21GA Length 4.3mm Internal Ring Size 6mm

14kt Gold Earring Cuff & Chain - Rassa                                                                                      Made out of solid 14kt Yellow Gold Nickle Free on a hinge clasp. Rassa is designed as a petit ear cuff at 1.9mm in thickness. Drop hanging at 11.5mm length a delicate solid 14kt chain to slight wrap around the ear placement. 

Piece Size:  Length / 9.3mm -  Width / 9.3mm 

Bar Gauge: 0.90mm / 19GA     Length 5.5mm                                                                      Internal Ring Size 6.8mm

14kt Gold Threadless - Diana Right                                                                                      Made out of Nickle free solid 14kt Gold & implant grade steel pin. Diana is one the smaller of the two cross designs offered. With a 6.2mm length and 1.15mm thickness crystal incrusted bar across a 12.9mm length & 0.8mm thickness solid gold bar. 

Piece Size:  Length / 12.9mm -  Width / 4mm 

Pin Gauge: 0.42mm / Length: 4mm* 

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

14kt Gold Threadless - Diana Left                                                                                          Made out of Nickle free solid 14kt Gold & implant grade steel pin. Diana is one the smaller of the two cross designs offered. With a 6.2mm length and 1.15mm thickness crystal incrusted bar across a 12.9mm length & 0.8mm thickness solid gold bar. 

Piece Size:  Length / 12.9mm -  Width / 4mm 

Pin Gauge: 0.42mm / Length: 4mm* 

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

14kt Gold Threadless Ring - Elsy                                                                                            Made out of solid 14kt Gold & implant grade steel pin. Elsy is designed as a petit ring but with the benefit of being threadless to allow it to fit into a labret for alternative placements. Elsy is the smaller option to the threadless ring designs with 13 round 1mm crystals pave the ring end to end .

Piece Size: Length / 7.6mm - Width / 1mm

Pin Gauge: 0.42mm / Length: 4mm*                                                                           Internal Ring Size - 5.1mm

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

14kt Gold Threadless Ring - Ella                                                                                            Made out of solid 14kt Gold & implant grade steel pin. Ella is the larger of the two threadless ring designs. Designed with the benefit of being threadless to allow it to fit into a labret for alternative placements. 22 round 1mm crystals pave the ring end to end.

Piece Size: Length / 12.8mm - Width / 1mm

Pin Gauge: 0.42mm / Length: 4mm*                                                                            Internal Ring Size - 10.3mm

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

14kt Gold Earring Paved Crystals - Inu                                                                                      Made out of solid 14kt Yellow Gold Nickle Free on a hinge clasp. Inu is a complete paved crystal incrusted earring with 24 round stones front to back.

Piece Size:  Length / 13.9mm -  Width / 1.2mm 

Gauge: 0.80mm / 20GA                                                                                                          Internal Ring Size 10.6mm

14kt Gold Threadless - Hera Right                                                                                        Made out of Nickle free solid 14kt Gold & implant grade steel pin. Hera is one of the larger of the two cross designs offered. With an 18.8mm length and 1.2mm thickness crystal incrusted bar across a 13.5mm length & 1.25mm thickness solid gold bar. 

Piece Size:  Length / 18.8mm -  Width / 9mm 

Pin Gauge: 0.42mm / Length: 4mm* 

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

14kt Gold Threadless - Hera Left                                                                                            Made out of Nickle free solid 14kt Gold & implant grade steel pin. Hera is one of the larger of the two cross designs offered. With an 18.8mm length and 1.2mm thickness crystal incrusted bar across a 13.5mm length & 1.25mm thickness solid gold bar. 

Piece Size:  Length / 18.8mm -  Width / 9mm 

Pin Gauge: 0.42mm / Length: 4mm* 

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

14kt Gold Threadless - Ezra                                                                                                    Made out of Nickle free solid 14kt Gold & implant grade steel pin. Ezra is one of our more unique designs. Made from all solid 14kt gold. Ezra hooks around the ear with a 3mm prong set crystal dangle. 

Piece Size:  Length / 26mm -  Width / 1.3mm 

Pin Gauge: 0.42mm / Length: 4mm* 

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

14kt Gold Threadless - Shiva                                                                                                  Made out of Nickle free solid 14kt Gold & implant grade steel pin. Shiva is a double piercing connected by solid 0.6mm 14kt gold chain. Each stone is 3mm princess cut. The full chain length stretched end to end is 50mm. Crystal to crystal pin chain length is 20mm. Followed by a 2.5mm petit hanging star.

Piece Size: Length / 20mm Piercing to Piercing - Width / 0.6mm - Chain

Pin Gauge: 0.42mm / Length: 4mm

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

14kt Gold Threadless - Nyla                                                                                                  Made out of Nickle free solid 14kt Gold & implant grade steel pin. Nyla is adorned with genuine 1.2mm diamond stones centered around a 2mm Garnet gemstone.  

Piece Size:  Length / 6.1mm  -  Width / 6.1mm

Pin Gauge: 0.42mm / Length: 4mm* 

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

14kt Gold Threadless - Enya                                                                                                  Made out of Nickle free solid 14kt Gold & implant grade steel pin. Enya is an alluring design of mixture shaped stones centered around a round aqua stone, 4 prong set baguettes aside 4 petit 1mm crystals.  

Piece Size:  Length / 9.1mm  -  Width / 9.1mm

Pin Gauge: 0.42mm / Length: 4mm* 

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

14kt Gold Threadless - Nata                                                                                                  Made out of Nickle free solid 14kt Gold & implant grade steel pin. An ornate design with a 4.0mm crystal baguette. Nata features a trio of round 1.1mm crystal above and below the baguette.

Piece Size:  Length / 9mm  -  Width / 3.0mm

Pin Gauge: 0.42mm / Length: 4mm* 

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

14kt Gold Threadless - Nina                                                                                                  Made out of Nickle free solid 14kt Gold & implant grade steel pin. Nina features 10 round 1.0mm crystals prong set into solid 14kt gold

Piece Size:  Length / 9.8mm  -  Width / 3.3mm

Pin Gauge: 0.42mm / Length: 4mm* 

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

14kt Gold Threadless - Zelda                                                                                                Made out of solid 14kt Gold & implant grade steel pin. Zelda features a long 5.7mm baguette crystal surrounded by a solid 14kt gold diamond shield.  

Piece Size:  Length / 11.8mm -  Width / 5.5mm

Pin Gauge: 0.42mm / Length: 4mm* 

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

14kt Gold Threadless- Enola                                                                                                  Made out of Nickle free solid 14kt Gold & implant grade steel pin. Pear shaped, Elona is made with 5 genuine 1.3mm diamonds.  

Piece Size:  Length / 6mm -  Width / 4.8mm

Pin Gauge: 0.42mm / Length: 4mm* 

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

14kt Gold Threadless - Cyra                                                                                                  Made out of Nickle free solid 14kt Gold & implant grade steel pin. Cyra is a circlet made of 6 crystal baguettes. 

Piece Size:  Length / 7.8mm -  Width / 7.8mm

Pin Gauge: 0.42mm / Length: 4mm* 

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

14kt Gold Threadless - Navi                                                                                                  Made out of Nickle free solid 14kt Gold & implant grade steel pin. Navi is made up of three 2mm round crystals on the main 14kt gold bar. Hanging below are 2 separate flat solid gold chains. 

Piece Size:  Length / 30mm -  Width / 2.4mm

Pin Gauge: 0.42mm / Length: 4mm* 

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

14kt Gold Threadless - Olek                                                                                                  Made out of Nickle free solid 14kt Gold & implant grade steel pin. One of our favorites, Olek consists of 5 round prong set stones curved around the main piece.  A 23mm chain continues to a petit 1.7mm round crystal. Olek is designed for the right ear.  

Piece Size:  Length / 10.7mm -  Width / 1.2mm

Pin Gauge: 0.42mm / Length: 4mm* 

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

14kt Gold Threadless - Olan                                                                                                  Made out of solid 14kt Gold & implant grade steel pin. One of our favorites, Olan consists of 5 round prong set stones curved around the main piece.  A 23mm chain continues to a petit 1.7mm round crystal. Olan is designed for the left ear.  

Piece Size:  Length / 10.7mm -  Width / 1.2mm

Pin Gauge: 0.42mm / Length: 4mm* 

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

14kt Gold Threadless - Tera                                                                                                    Made out of Nickle free solid 14kt Gold & implant grade steel pin. Tera is another one of our favorites. With a chain length of 20mm, at one end a 2.0mm round prong set stone & at the other a solid gold circlet dressed with a 1.5mm prong set crystal stone.

Piece Size: Length Chain / 20mm - Width / 4.4mm - Circlet

Pin Gauge: 0.42mm / Length: 4mm*

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

14kt Gold Threadless - Zena                                                                                                  Made out of solid 14kt Gold & implant grade steel pin. Zena is a circlet made of 15 round 1.7mm crystals. End to end the circlet is 10mm in width.

Piece Size:  Length / 10mm -  Width / 10mm

Pin Gauge: 0.42mm / Length: 4mm* 

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

14kt Gold Threadless - Kaya                                                                                                  Made out of Nickle free solid 14kt Gold & implant grade steel pin. Kaya is an arrow shape solid gold diamond incrusted piece consisting of ten 0.9mm genuine diamonds.

Piece Size:  Length / 9.9mm -  Width / 4.7mm

Pin Gauge: 0.42mm / Length: 4mm* 

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

14kt Gold Threadless - Rio                                                                                                    Made out of Nickle free solid 14kt Gold & implant grade steel pin. Rio is a triple marquise crystal prong set piece separated by 1.4mm solid gold balls. Each stone is 3mm long and 1.5mm wide.

Piece Size:  Length / 7.1mm -  Width / 4mm

Pin Gauge: 0.42mm / Length: 4mm* 

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

14kt Gold Threadless - Arris                                                                                                  Made out of Nickle free solid 14kt Gold & implant grade steel pin. A princess cut 2mm prong set crystal.

Piece Size:  Length / 3mm -  Width / 3mm

Pin Gauge: 0.42mm / Length: 4mm* 

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

14kt Gold Threadless - Atlas                                                                                                  Made out of Nickle free solid 14kt Gold & implant grade steel pin. A unique design consisting of a 2.8mm triangle crystal with a 2mm round stone above.  

Piece Size:  Length / 6.4mm -  Width / 4.5mm

Pin Gauge: 0.42mm / Length: 4mm* 

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

14kt Gold Threadless - Emer                                                                                                  Made out of Nickle free solid 14kt Gold & implant grade steel pin. Emer is a 5.7mm round ring of genuine blue diamonds consisting of 16 prong set 1.2mm stones.

Piece Size:  Length / 5.7mm -  Width / 5.7mm

Pin Gauge: 0.42mm / Length: 4mm* 

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.