14kt Gold Threadless - Jeweled Ovate                                                                                  Made out of solid 14kt Gold & implant grade steel pin. 

Piece Size:  Length / 5mm  -  Width / 2.6mm

Pin Size: 0.42mm / Length: 4mm*

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

14kt Gold Threadless - Inoa                                                                                                  Made out of Nickle free solid 14kt Gold & implant grade steel pin. Designed to be worn multiple ways, Inoa has a 49mm chain linking the main gold bar to the lower gold ring. This allows to the piece to be worn hanging or the ring to connect to the labret. The gold bar is dressed with a 2mm prong set stone.

Piece Size: Length / 10.7mm - Width / 1.2mm

Pin Gauge: 0.42mm / Length: 4mm*

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

14kt Gold Threadless - Skull With Daisies                                                                      Made out of Nickle free solid 14kt Gold & implant grade steel pin. 

Piece Size: Length / 7.3mm  -  Width / 7.4mm

Pin Gauge: 0.42mm / Length: 4mm*

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

14kt Gold Earring With 5 Prong Set Crystals - Yana                                                                  Made out of solid 14kt Yellow Gold Nickle Free on a hinge clasp. Yana is a petit earing with five 1.7mm prong set crystals front facing followed by a 1.4mm gold band towards the rear.

Piece Size: Length / 8.7mm - Width / 8.7mm

Bar Gauge: 0.70mm / 21GA Length 4.3mm Internal Ring Size 6mm

14kt Gold Threadless - Rinya                                                                                                Made out of Nickle free solid 14kt Gold & implant grade steel pin. Rinya is a bespoke design consisting of a jeweled 6 crystal solid gold bar with draping flat style chain. 

Piece Size:  Length / 37.4mm -  Width / 6.5mm

Pin Gauge: 0.42mm / Length: 4mm* 

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

14kt Gold Threadless - Linya                                                                                                  Made out of Nickle free solid 14kt Gold & implant grade steel pin. Linya is a bespoke design consisting of a jeweled 6 crystal solid gold bar with draping flat style chain. 

Piece Size:  Length / 37.4mm -  Width / 6.5mm

Pin Gauge: 0.42mm / Length: 4mm* 

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

14kt Gold Threadless - Jewel M                                                                                                      Made out of Nickle free solid 14kt Gold & implant grade steel pin. 

Piece Size: Length / 4.9mm  -  Width / 4.5mm

• Crystal Size: 0.9mm x 11pcs

Pin Gauge: 0.42mm / Length: 4mm*

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

14kt Gold Threadless - Jeweled Cross Attachment - Lab Grown Diamond                          Made out of Nickle free solid 14kt Gold & implant grade steel pin.

A lab-grown diamond is a diamond created in a lab using advanced technology, replicating the natural process. It has the same physical and chemical properties as a natural diamond, offering a sustainable, ethical, and often more affordable alternative to mined diamonds.

Piece Size: Length / 5.2mm  -  Width / 4.2mm

Pin Gauge: 0.4mm / Length: 5mm*

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

14kt Gold Threadless Ring - Elsy                                                                                            Made out of solid 14kt Gold & implant grade steel pin. Elsy is designed as a petit ring but with the benefit of being threadless to allow it to fit into a labret for alternative placements. Elsy is the smaller option to the threadless ring designs with 13 round 1mm crystals pave the ring end to end .

Piece Size: Length / 7.6mm - Width / 1mm

Pin Gauge: 0.42mm / Length: 4mm*                                                                           Internal Ring Size - 5.1mm

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

14kt Gold Threadless - Olek                                                                                                  Made out of Nickle free solid 14kt Gold & implant grade steel pin. One of our favorites, Olek consists of 5 round prong set stones curved around the main piece.  A 23mm chain continues to a petit 1.7mm round crystal. Olek is designed for the right ear.  

Piece Size:  Length / 10.7mm -  Width / 1.2mm

Pin Gauge: 0.42mm / Length: 4mm* 

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

14kt Gold Threadless - Kiana                                                                                                Made out of Nickle free solid 14kt Gold & implant grade steel pin. Consisting of 5 crystals overlaying a black epoxy flower this design is unique in its depth and contrast.

Piece Size:  Length / 6.6mm -  Width / 6.6mm

Pin Gauge: 0.42mm / Length: 4mm* 

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

14kt Gold Threadless - Jeweled Star Attachment - Lab Grown Diamond                              Made out of Nickle free solid 14kt Gold & implant grade steel pin.

A lab-grown diamond is a diamond created in a lab using advanced technology, replicating the natural process. It has the same physical and chemical properties as a natural diamond, offering a sustainable, ethical, and often more affordable alternative to mined diamonds.

Piece Size: Length / 4.7mm  -  Width / 4.7mm

Pin Gauge: 0.4mm / Length: 5mm*

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

14kt Gold Threadless - Olan                                                                                                  Made out of solid 14kt Gold & implant grade steel pin. One of our favorites, Olan consists of 5 round prong set stones curved around the main piece.  A 23mm chain continues to a petit 1.7mm round crystal. Olan is designed for the left ear.  

Piece Size:  Length / 10.7mm -  Width / 1.2mm

Pin Gauge: 0.42mm / Length: 4mm* 

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

14kt Gold Threadless - Tera                                                                                                    Made out of Nickle free solid 14kt Gold & implant grade steel pin. Tera is another one of our favorites. With a chain length of 20mm, at one end a 2.0mm round prong set stone & at the other a solid gold circlet dressed with a 1.5mm prong set crystal stone.

Piece Size: Length Chain / 20mm - Width / 4.4mm - Circlet

Pin Gauge: 0.42mm / Length: 4mm*

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

14kt Gold Threadless - Aura                                                                                                  Made out of Nickel free solid 14kt Gold & implant grade steel pin. Aura is made of a total of 9 crystals. 4 marquise stone, 4 round 1mm crystals and a center aqua marine heart.  

Piece Size:  Length / 10.7mm -  Width / 10.7mm

Pin Gauge: 0.42mm / Length: 4mm* 

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

14kt Gold Threadless - Ada                                                                                                    Made out of Nickle free solid 14kt Gold & implant grade steel pin. Diamond shaped solid gold design surrounding a 3mm crystal stone.

Piece Size:  Length / 6.3mm  -  Width / 6.3mm - Square form

Pin Gauge: 0.42mm / Length: 4mm*

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

14kt Gold Threadless - Pyrus                                                                                                  Made out of solid 14kt Gold & implant grade steel pin. This pear shaped crystal is embedded in a 3 clasp prong set in14kt gold. 

Piece Size:  Length / 5.4mm  -  Width / 3mm

Pin Size: 0.42mm / Length: 4mm*

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

14kt Gold Threadless - Triangle Jet with Crystal                                                                    Made out of solid 14kt Gold & implant grade steel pin. The 3mm round 6 prong set crystal sizes above a 3.4mm black triangle.

Piece Size:  Length / 6.7mm  -  Width / 3.8mm

Pin Size: 0.42mm / Length: 4mm*

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

14kt Gold Threadless - Olla - Right                                                                                        Made out of Nickle free solid 14kt Gold & implant grade steel pin. Olla is designed for the right ear but also versatile for multiple placements. Featured with a .9mm gold bar wrapping around to the rear. A 1.75mm round stone sits above the gold bar. Running adjacent a gold chain drop hanging 17.9mm. A unique design with elegance and sophistication.      

Piece Size:  Length / 17.9mm  -  Width / 6.7mm 

Pin Gauge: 0.42mm / Length: 4mm*

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

14kt Gold Threadless - Olina - Left                                                                                        Made out of Nickle free solid 14kt Gold & implant grade steel pin. Olina is designed for the left ear but also versatile for multiple placements. Featured with a .9mm gold bar wrapping around to the rear. A 1.75mm round stone sits above the gold bar. Running adjacent a gold chain drop hanging 17.9mm. A unique design with elegance and sophistication.      

Piece Size:  Length / 17.9mm  -  Width / 6.7mm 

Pin Gauge: 0.42mm / Length: 4mm*

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

14kt Gold Threadless - Zelda                                                                                                Made out of solid 14kt Gold & implant grade steel pin. Zelda features a long 5.7mm baguette crystal surrounded by a solid 14kt gold diamond shield.  

Piece Size:  Length / 11.8mm -  Width / 5.5mm

Pin Gauge: 0.42mm / Length: 4mm* 

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

14kt Gold Earring Cuff & Chain - Rassa                                                                                      Made out of solid 14kt Yellow Gold Nickle Free on a hinge clasp. Rassa is designed as a petit ear cuff at 1.9mm in thickness. Drop hanging at 11.5mm length a delicate solid 14kt chain to slight wrap around the ear placement. 

Piece Size:  Length / 9.3mm -  Width / 9.3mm 

Bar Gauge: 0.90mm / 19GA     Length 5.5mm                                                                      Internal Ring Size 6.8mm

14kt Gold Threadless - Enya                                                                                                  Made out of Nickle free solid 14kt Gold & implant grade steel pin. Enya is an alluring design of mixture shaped stones centered around a round aqua stone, 4 prong set baguettes aside 4 petit 1mm crystals.  

Piece Size:  Length / 9.1mm  -  Width / 9.1mm

Pin Gauge: 0.42mm / Length: 4mm* 

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

14kt Gold Threadless - Mika                                                                                                  Made out of Nickle free solid 14kt Gold & implant grade steel pin. Mika is made of 2 parts. Each part is made up of three 2mm crystal stones prong set in solid 14kt gold connected by a swivel allowing for movement.

Piece Size:  Length / 17.6mm  -  Width / 2.35mm 

Pin Gauge: 0.42mm / Length: 4mm*

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

14kt Gold Threadless - Gia                                                                                                    Made out of Nickle free solid 14kt Gold & implant grade steel pin. Gia is a 5mm uniquely side beveled pearshape crystal. Below are 5 prong set 1mm crystals.

Piece Size:  Length / 9.55mm -  Width / 8.2mm

Pin Gauge: 0.42mm / Length: 4mm* 

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

14kt Gold Threadless - Loop Attachment - Lab Grown Diamond                                          Made out of Nickle free solid 14kt Gold & implant grade steel pin.

A lab-grown diamond is a diamond created in a lab using advanced technology, replicating the natural process. It has the same physical and chemical properties as a natural diamond, offering a sustainable, ethical, and often more affordable alternative to mined diamonds.

Piece Size: Length / 3.9mm  -  Width / 3.9mm

Pin Gauge: 0.4mm / Length: 5mm*

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

14kt Gold Earring With 5 Prong Set Princess Crystals - Issa Right                                            Made out of solid 14kt Yellow Gold Nickle Free on a hinge clasp. Designed around 5 prong set 2mm princess cut crystals along a 1mm solid gold band. Issa is petit and elegant.

Piece Size:  Length / 11.3mm -  Width / 11.3mm 

Bar Gauge: 0.80mm / 20GA     Length 6mm                                                                      Internal Ring Size - 8.8mm

14kt Gold Earring With 5 Prong Set Princess Crystals - Issa Left                                                Made out of solid 14kt Yellow Gold Nickle Free on a hinge clasp. Designed around 5 prong set 2mm princess cut crystals along a 1mm solid gold band. Issa is petit and elegant.

Piece Size:  Length / 11.3mm -  Width / 11.3mm 

Bar Gauge: 0.80mm / 20GA     Length 6mm                                                                      Internal Ring Size - 8.8mm

14kt Gold Threadless - Shiva                                                                                                  Made out of Nickle free solid 14kt Gold & implant grade steel pin. Shiva is a double piercing connected by solid 0.6mm 14kt gold chain. Each stone is 3mm princess cut. The full chain length stretched end to end is 50mm. Crystal to crystal pin chain length is 20mm. Followed by a 2.5mm petit hanging star.

Piece Size: Length / 20mm Piercing to Piercing - Width / 0.6mm - Chain

Pin Gauge: 0.42mm / Length: 4mm

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

14kt Gold Threadless - Perla                                                                                                  Made out of Nickle free solid 14kt Gold & implant grade steel pin. Perla consists of a 5mm baguette stone surrounded by a cast 14 0.8mm prong set stones. Below is a 3mm Swarovski pearl. 

Piece Size:  Length / 11.3mm -  Width / 6.1mm

Pin Gauge: 0.42mm / Length: 4mm* 

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

14kt Gold Threadless Ring - Ella                                                                                            Made out of solid 14kt Gold & implant grade steel pin. Ella is the larger of the two threadless ring designs. Designed with the benefit of being threadless to allow it to fit into a labret for alternative placements. 22 round 1mm crystals pave the ring end to end.

Piece Size: Length / 12.8mm - Width / 1mm

Pin Gauge: 0.42mm / Length: 4mm*                                                                            Internal Ring Size - 10.3mm

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

14kt Gold Threadless - Hera Right                                                                                        Made out of Nickle free solid 14kt Gold & implant grade steel pin. Hera is one of the larger of the two cross designs offered. With an 18.8mm length and 1.2mm thickness crystal incrusted bar across a 13.5mm length & 1.25mm thickness solid gold bar. 

Piece Size:  Length / 18.8mm -  Width / 9mm 

Pin Gauge: 0.42mm / Length: 4mm* 

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.