Internally Threaded
Trident Titanium Navel Internally Threaded 0.9mm (Bottom) and Threadless (Top)
Trident Titanium Navel Internally Threaded 0.9mm (Bottom) and Threadless (Top) Bar
1.6 (14g) x 10mm
Internally Threaded Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)
Threadless Jewelry Method:
Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:
- Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
- Slightly bend the insertion pin within the bar.
- Push the end into the shaft and test the fit.
Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.
Trident 24kt Gold PVD Bee
Trident 24kt Gold PVD Bee
Internally Threaded Titanium Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)
PVD (Vacuum coating), also known as thin-film deposition, is a vacuum chamber process whereby a very thin and steady layer of coating is applied to the titanium surface of a substrate, protecting it from forces that might wear it down or decrease its efficiency.
PVD Coating isn’t adding another layer to the object that will chip or crack with time (think old paint).
PVD coating is becoming a standard for medical tools. The coating reduces friction, provides biocompatibility for implants, is antimicrobial, and it serves as a chemical barrier for those with a sensitivity to nickel (which can often be found in the tool).
As opposed to other coatings that chip, crack, and wear down, vacuum coatings are a shining armor for your jewelry, providing a strong and thin coating for a variety of applications.
Unlike paints which other companies use and many other methods, this technique is body-friendly so it can be used safely and without a problem.
Trident Titanium Internally Threaded Bee
Trident Titanium Internally Threaded Bee
Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)
Trident Internally Threaded Moon with Opal
Trident Internally Threaded Moon with Opal
Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)
Trident Titanium Internal Thread Small Mix Color Flower
Trident Titanium 0.9mm Small Mix Color Flower 0.9mm Thread (For 16G)
Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)
Trident Internally Threaded Disk
Trident Internally Threaded Disk Attachment 0.9mm (For 16G)
Internally Threaded Titanium Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)
Trident Internally Threaded Spike 3mm
Trident Internally Threaded Spike 0.9mm (For 16G)
Internally Threaded Titanium Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)
Titanium Internally Threaded Sword
Trident Titanium Internally Threaded Sword Attachment 0.9mm (For 16G)
Internally Threaded Titanium Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)
24kt Gold PVD Titanium 10 Petal Jeweled Flower
Trident Gold PVD Titanium Internally Threaded 10 Petal Jeweled Flower 0.9mm (16GA)
Internally Threaded Titanium Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)
PVD (Vacuum coating), also known as thin-film deposition, is a vacuum chamber process whereby a very thin and steady layer of coating is applied to the titanium surface of a substrate, protecting it from forces that might wear it down or decrease its efficiency.
PVD Coating isn’t adding another layer to the object that will chip or crack with time (think old paint).
PVD coating is becoming a standard for medical tools. The coating reduces friction, provides biocompatibility for implants, is antimicrobial, and it serves as a chemical barrier for those with a sensitivity to nickel (which can often be found in the tool).
As opposed to other coatings that chip, crack, and wear down, vacuum coatings are a shining armor for your jewelry, providing a strong and thin coating for a variety of applications.
Unlike paints which other companies use and many other methods, this technique is body-friendly so it can be used safely and without a problem.
24kt Gold PVD Titanium Moon
Trident Gold PVD Titanium Moon Attachment 0.9mm (16G)
Internally Threaded Titanium Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)
PVD (Vacuum coating), also known as thin-film deposition, is a vacuum chamber process whereby a very thin and steady layer of coating is applied to the titanium surface of a substrate, protecting it from forces that might wear it down or decrease its efficiency.
PVD Coating isn’t adding another layer to the object that will chip or crack with time (think old paint).
PVD coating is becoming a standard for medical tools. The coating reduces friction, provides biocompatibility for implants, is antimicrobial, and it serves as a chemical barrier for those with a sensitivity to nickel (which can often be found in the tool).
As opposed to other coatings that chip, crack, and wear down, vacuum coatings are a shining armor for your jewelry, providing a strong and thin coating for a variety of applications.
Unlike paints which other companies use and many other methods, this technique is body-friendly so it can be used safely and without a problem.
Jeweled Ovate Flower Internal Thread
Trident Jeweled Ovate Flower Attachment 0.9mm (For 16G)
Internally Threaded Titanium Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)
Trident Internally Threaded 24kt Gold PVD Labret Pin
16GA / 1.2mm - 3mm Base
16GA / 1.2mm - 4mm Base
Internally Threaded Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)
PVD (Vacuum coating), also known as thin-film deposition, is a vacuum chamber process whereby a very thin and steady layer of coating is applied to the titanium surface of a substrate, protecting it from forces that might wear it down or decrease its efficiency.
PVD Coating isn’t adding another layer to the object that will chip or crack with time (think old paint).
PVD coating is becoming a standard for medical tools. The coating reduces friction, provides biocompatibility for implants, is antimicrobial, and it serves as a chemical barrier for those with a sensitivity to nickel (which can often be found in the tool).
As opposed to other coatings that chip, crack, and wear down, vacuum coatings are a shining armor for your jewelry, providing a strong and thin coating for a variety of applications.
Unlike paints which other companies use and many other methods, this technique is body-friendly so it can be used safely and without a problem.
Internally Threaded Marquise With Round Stone Navel
Trident Internally Threaded Marquise Round Stone Navel 1.6mm x 10mm
Internally Threaded Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)
Small Tear Internally Threaded Navel
Trident Internally Threaded Small Tear Navel 1.6mm x 10.5mm
Internally Threaded Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)
Trident 24kt Gold PVD Jeweled 5 Stone Bar Attachment
Gold PVD Trident Titanium 0.9mm Internally Threaded Jeweled 5 Stone Bar Attachment
Internally Threaded Titanium Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)
Trident 24kt Gold PVD 5 Curved Jeweled Prong Set Attachment
Gold PVD Trident Titanium 0.9mm Internally Threaded 5 Curved Jeweled Prong Set Attachment
Internally Threaded Titanium Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)
PVD (Vacuum coating), also known as thin-film deposition, is a vacuum chamber process whereby a very thin and steady layer of coating is applied to the titanium surface of a substrate, protecting it from forces that might wear it down or decrease its efficiency.
PVD Coating isn’t adding another layer to the object that will chip or crack with time (think old paint).
PVD coating is becoming a standard for medical tools. The coating reduces friction, provides biocompatibility for implants, is antimicrobial, and it serves as a chemical barrier for those with a sensitivity to nickel (which can often be found in the tool).
As opposed to other coatings that chip, crack, and wear down, vacuum coatings are a shining armor for your jewelry, providing a strong and thin coating for a variety of applications.
Unlike paints which other companies use and many other methods, this technique is body-friendly so it can be used safely and without a problem.
Trident 24kt Gold PVD Internally Threaded Trio Attachment
Gold PVD Trident Titanium 0.9mm Internally Threaded Trio Attachment
Internally Threaded Titanium Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)
PVD (Vacuum coating), also known as thin-film deposition, is a vacuum chamber process whereby a very thin and steady layer of coating is applied to the titanium surface of a substrate, protecting it from forces that might wear it down or decrease its efficiency.
PVD Coating isn’t adding another layer to the object that will chip or crack with time (think old paint).
PVD coating is becoming a standard for medical tools. The coating reduces friction, provides biocompatibility for implants, is antimicrobial, and it serves as a chemical barrier for those with a sensitivity to nickel (which can often be found in the tool).
As opposed to other coatings that chip, crack, and wear down, vacuum coatings are a shining armor for your jewelry, providing a strong and thin coating for a variety of applications.
Unlike paints which other companies use and many other methods, this technique is body-friendly so it can be used safely and without a problem.
Trident 24kt Gold PVD Internally Threaded Claw Set Attachment
Gold PVD Trident Titanium 0.9mm Jeweled Internal Flat Attachment
Internally Threaded Titanium Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)
PVD (Vacuum coating), also known as thin-film deposition, is a vacuum chamber process whereby a very thin and steady layer of coating is applied to the titanium surface of a substrate, protecting it from forces that might wear it down or decrease its efficiency.
PVD Coating isn’t adding another layer to the object that will chip or crack with time (think old paint).
PVD coating is becoming a standard for medical tools. The coating reduces friction, provides biocompatibility for implants, is antimicrobial, and it serves as a chemical barrier for those with a sensitivity to nickel (which can often be found in the tool).
As opposed to other coatings that chip, crack, and wear down, vacuum coatings are a shining armor for your jewelry, providing a strong and thin coating for a variety of applications.
Unlike paints which other companies use and many other methods, this technique is body-friendly so it can be used safely and without a problem.
Titanium 24kt Gold PVD Jeweled Internal Flat Attachment
Gold PVD Trident Titanium 0.9mm Jeweled Internal Flat Attachment
Internally Threaded Titanium Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)
PVD (Vacuum coating), also known as thin-film deposition, is a vacuum chamber process whereby a very thin and steady layer of coating is applied to the titanium surface of a substrate, protecting it from forces that might wear it down or decrease its efficiency.
PVD Coating isn’t adding another layer to the object that will chip or crack with time (think old paint).
PVD coating is becoming a standard for medical tools. The coating reduces friction, provides biocompatibility for implants, is antimicrobial, and it serves as a chemical barrier for those with a sensitivity to nickel (which can often be found in the tool).
As opposed to other coatings that chip, crack, and wear down, vacuum coatings are a shining armor for your jewelry, providing a strong and thin coating for a variety of applications.
Unlike paints which other companies use and many other methods, this technique is body-friendly so it can be used safely and without a problem.
Trident Gold PVD Titanium Jeweled Attachment 4 Stones
Gold PVD Trident Titanium 0.9mm Jeweled Attachment 4 Stones
Internally Threaded Titanium Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)
PVD (Vacuum coating), also known as thin-film deposition, is a vacuum chamber process whereby a very thin and steady layer of coating is applied to the titanium surface of a substrate, protecting it from forces that might wear it down or decrease its efficiency.
PVD Coating isn’t adding another layer to the object that will chip or crack with time (think old paint).
PVD coating is becoming a standard for medical tools. The coating reduces friction, provides biocompatibility for implants, is antimicrobial, and it serves as a chemical barrier for those with a sensitivity to nickel (which can often be found in the tool).
As opposed to other coatings that chip, crack, and wear down, vacuum coatings are a shining armor for your jewelry, providing a strong and thin coating for a variety of applications.
Unlike paints which other companies use and many other methods, this technique is body-friendly so it can be used safely and without a problem.
Internally Threaded Titanium Dangle Navel Bar
Internally Threaded Titanium Dangle Navel Bar 1.6mm x 10mm
Internally Threaded Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)
24kt Gold PVD Trident Titanium Internal Bolt
Gold PVD Trident Titanium 0.9mm Internal Threaded Bolt
Internally Threaded Titanium Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)
PVD (Vacuum coating), also known as thin-film deposition, is a vacuum chamber process whereby a very thin and steady layer of coating is applied to the titanium surface of a substrate, protecting it from forces that might wear it down or decrease its efficiency.
PVD Coating isn’t adding another layer to the object that will chip or crack with time (think old paint).
PVD coating is becoming a standard for medical tools. The coating reduces friction, provides biocompatibility for implants, is antimicrobial, and it serves as a chemical barrier for those with a sensitivity to nickel (which can often be found in the tool).
As opposed to other coatings that chip, crack, and wear down, vacuum coatings are a shining armor for your jewelry, providing a strong and thin coating for a variety of applications.
Unlike paints which other companies use and many other methods, this technique is body-friendly so it can be used safely and without a problem.
24kt Gold PVD Trident Titanium Internal Cluster
24kt Gold PVD Titanium Internal Lab Cluster 0.9mm Thread Long 3 Crystals
Internally Threaded Titanium Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)
PVD (Vacuum coating), also known as thin-film deposition, is a vacuum chamber process whereby a very thin and steady layer of coating is applied to the titanium surface of a substrate, protecting it from forces that might wear it down or decrease its efficiency.
PVD Coating isn’t adding another layer to the object that will chip or crack with time (think old paint).
PVD coating is becoming a standard for medical tools. The coating reduces friction, provides biocompatibility for implants, is antimicrobial, and it serves as a chemical barrier for those with a sensitivity to nickel (which can often be found in the tool).
As opposed to other coatings that chip, crack, and wear down, vacuum coatings are a shining armor for your jewelry, providing a strong and thin coating for a variety of applications.
Unlike paints which other companies use and many other methods, this technique is body-friendly so it can be used safely and without a problem.
Internally Threaded Jeweled Tear Cluster
Internally Threaded Tear Cluster Attachment 0.9mm (For 16G)
Internally Threaded Titanium Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)
Trident Titanium Jeweled Internally Threaded Labret 3mm Crystal
Trident Titanium Jeweled Internally Threaded Labret 3mm Crystal
Thread - 0.9mm (For 16G)
Internally Threaded Titanium Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)
Internally Threaded Crowned Tear Attachment Lara 4mm
Internally Threaded Crowned Tear 0.9mm Thread Attachment Lara - 4mm
Internally Threaded Titanium Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)
Internal Threaded 1 Drop Jeweled Prong Set Navel
Trident Internal Threaded 1 Drop Jeweled Prong Set Navel 1.6mm x 10mm
Internally Threaded Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)
Internal Threaded Square Trio Attachment
Trident Titanium Internal 0.9mm Threaded Square Trio Attachment (For 16G)
Internally Threaded Titanium Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)
Trident Titanium Jeweled Marquise Attachment
Trident Titanium Marquise Attachment 0.9mm Thread
Internally Threaded Titanium Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)
Internal Threaded 2 Jeweled Prong Set Navel
Trident Internal Threaded 2 Jeweled Prong Set Navel 1.6mm x 10mm
Internally Threaded Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)
Internally Threaded Jeweled Paw Cluster Attachment
Trident Titanium Internally Threaded Jeweled Paw Cluster Attachment 0.9mm (For 16GA)
Internally Threaded Titanium Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)
Internally Threaded Tear Drop Jeweled Attachment
Trident Titanium Internally Threaded Tear Jeweled Attachment 0.9mm (For 16GA)
Internally Threaded Titanium Manufactured out of Implant Grade Titanium (Ti-6AL-4V-ELI ASTM F136)