White 14kt Gold Threadless Moon & Opal                                                                                Made out of solid 14kt Gold & implant grade steel pin. Jeweled with 1.5mm white fire cultured opal.

Piece Size:  Length / 3.3mm  -  Width / 3mm

Pin Size: 0.42mm / Length: 4mm*

White 14kt Gold Threadless Jewel Sword                                                                              Made out of solid 14kt Gold & implant grade steel pin. Tip to tip the beautify detailed sword is 9.1mm long and 4.3mm wide.

Piece Size:  Length / 9.1mm  -  Width / 4.3mm

Pin Size: 0.42mm / Length: 4mm*

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

White Gold 14kt Threadless Prong Set 3mm Stone                                                              Made out of solid 14kt Gold & implant grade steel pin. 

Piece Size:  Length / 3mm  -  Width / 3mm

Pin Size: 0.42mm / Length: 4mm*

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

White 14kt Gold Threadless Opal                                                                                          Made out of solid 14kt Gold & implant grade steel pin. 4mm white fire cultured opal embedded in a solid 14kt gold cast.

Piece Size:  Length / 4mm  -  Width / 4mm

Pin Size: 0.42mm / Length: 4mm*

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

14kt Gold Threadless - Feather                                                                                                        Made out of Nickle free solid 14kt Gold & implant grade steel pin. 

Piece Size:  Length / 6.0mm  -  Width / 2.0mm

Crystal Size: 1.1mm

Pin Gauge: 0.42mm / Length: 4mm*

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

14kt Gold Threadless - Ankh                                                                                                  Made out of Nickle free solid 14kt Gold & implant grade steel pin. 

Piece Size:  Length / 6.0mm  -  Width / 3.6mm

Pin Gauge: 0.42mm / Length: 4mm*

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

14kt Gold Threadless - Mushroom                                                                                        Made out of Nickle free solid 14kt Gold & implant grade steel pin. 

Piece Size:  Length / 5.2mm  -  Width / 4.7mm

Pin Gauge: 0.42mm / Length: 4mm*

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

14kt Gold Threadless - Sun                                                                                                    Made out of Nickle free solid 14kt Gold & implant grade steel pin. 

Piece Size:  Length / 5.0mm  -  Width / 5.0mm

Pin Gauge: 0.42mm / Length: 4mm*

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

14kt Gold Threadless - Moon With Face                                                                                Made out of Nickle free solid 14kt Gold & implant grade steel pin. 

Piece Size:  Length / 6.5mm  -  Width / 4.9mm

Pin Gauge: 0.42mm / Length: 4mm*

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

14kt Gold Threadless - Shark                                                                                                Made out of Nickle free solid 14kt Gold & implant grade steel pin. 

Piece Size:  Length / 6.9mm  -  Width / 3.8mm

Pin Gauge: 0.42mm / Length: 4mm*

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

14kt Gold Threadless - Dangle Moon                                                                                    Made out of Nickle free solid 14kt Gold & implant grade steel pin. 

Piece Size:  Length / 5.3mm  -  Width / 5.0mm

Crystal Size: 1.3mm

Pin Gauge: 0.42mm / Length: 4mm*

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

Trident 14kt Gold Threadless - Heart                                                                                              Made out of Nickle free solid 14kt Gold & implant grade steel pin. 

Piece Size:  Length / 5.0mm  -  Width / 3.5mm

Pin Gauge: 0.42mm / Length: 4mm*

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

14kt Gold Threadless - Star With Round Jewel                                                                      Made out of Nickle free solid 14kt Gold & implant grade steel pin. 

Piece Size:  Length / 4.8mm  -  Width / 3.0mm

Crystal Size: 2.5mm

Pin Gauge: 0.42mm / Length: 4mm*

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

14kt Gold Threadless - Penguin                                                                                                      Made out of Nickle free solid 14kt Gold & implant grade steel pin. 

Piece Size:  Length / 5.8mm  -  Width / 4.1mm

Pin Gauge: 0.42mm / Length: 4mm*

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

14kt Gold Threadless - Aten                                                                                                            Made out of Nickle free solid 14kt Gold & implant grade steel pin. 

Piece Size:  Length / 6.0mm  -  Width / 5.0mm

Pin Gauge: 0.42mm / Length: 4mm*

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

14kt Gold Threadless - Cross                                                                                                          Made out of Nickle free solid 14kt Gold & implant grade steel pin. 

Piece Size:  Length / 3.9mm  -  Width / 2.1mm

Pin Gauge: 0.42mm / Length: 4mm*

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

14kt Gold Threadless - Duck                                                                                                          Made out of Nickle free solid 14kt Gold & implant grade steel pin. 

Piece Size:  Length / 4.1mm  -  Width / 4.0mm

Crystal Size: 0.9mm

Pin Gauge: 0.42mm / Length: 4mm*

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

14kt Gold Threadless - 3 Petal Marquise                                                                              Made out of Nickle free solid 14kt Gold & implant grade steel pin. 

Piece Size: Super Small & Delicate Length / 2.1mm  -  Width / 3.5mm

Crystal Size: 0.9mm

Pin Gauge: 0.42mm / Length: 4mm*

Threadless Jewelry Method:

Threadless jewelry is tensioned by using the end of the attachment and bending it within the bar to hold into place. To create the tension insert the pin on the end of the attachment slightly into the bar and bend slightly. Once inserted into the bar the bend in the pin should create the tension needed to hold into place. Direction below:

1. Insert the pin on the end of the attachment 1/4 - 1/3 into the bar. (Labret, barbell etc.)
2. Slightly bend the insertion pin within the bar.
3. Push the end into the shaft and test the fit.

Insuring the fit: Insure the attachment is held in place and is tight. Adjust as necessary, if the pin does not hold tight enough redo the steps & create more tension.

14kt Gold 5 Prong Set Jewel Hinged Ring

Made out of Solid 14kt Gold Nickel Free.

Bar Gauge: 1.2mm / 16GA     Length: 8mm

• Crystal Size: 2.25mm x 1pc
• Crystal Size: 2.00mm x 2pc
• Crystal Size: 1.75mm x 2pcs

This sophisticated 14kt gold hinge ring with 5 prong set crystals will add a timeless and eye-catching look to your accessory collection. Crafted from solid gold, the ring features a secure and durable construction to ensure it withstands the test of time. Ideal for daily wear, this elegant piece of jewelry is a must-have for any jewelry aficionado.

14kt Gold Paved Tear Hinged Ring

Made out of Solid 14kt Gold Nickel Free.

Bar Gauge: 1.2mm / 16GA     Length: 8mm

• Crystal Size: 1.75mm x 1pcs
• Crystal Size: 1.5mm x 2pcs
• Crystal Size: 1.3mm x 2pcs
• Crystal Size: 1.0mm x 6pcs

This classic 14kt gold hinged tear ring is adorned with pave-set crystals for a unique and shimmering look. Crafted in premium gold, it is sure to be the perfect addition to any jewelry collection.

14kt Gold 7 Prong Set Hinged Ring

Made out of Solid 14kt Gold Nickel Free.

Bar Gauge: 1.2mm / 16GA     Length: 8mm

• Crystal Size: 2.0mm x 1pcs
• Crystal Size: 1.75mm x 2pcs
• Crystal Size: 1.3mm x 4pcs

This 14kt Gold 7 Prong Set Hinge Ring is a stunning piece of jewelry. Crafted from 14kt gold, its 7 prongs are set to shine and make a statement. Perfect for any special occasion or as an everyday piece, this sophisticated ring will be a treasured part of your collection.

14kt Gold Paved with Paved Prong Set Hinged Ring

Made out of Solid 14kt Gold Nickel Free.

Bar Gauge: 1.2mm / 16GA     Length: 8mm

• Crystal Size: 1.1mm x 15pcs
• Crystal Size: 1.0mm x 14pcs

This 14kt gold ring is the perfect addition to any jewelry collection. 29 stones are prong set in a unique and eye-catching design. The hinge detail adds a delicate touch, making this ring a timeless piece.

14kt Gold Paved Crystals With Blue Stones Hinged Ring

Made out of Solid 14kt Gold Nickel Free.

Bar Gauge: 1.2mm / 16GA     Length: 8mm

• Crystal Size: 1.1mm x 13pcs
• Turquoise Size: 1.3mm x 11pcs

Make a statement with this stunning 14kt gold hinge ring featuring individually set crystals and turquoise stones. The intricate details of the design add an elegant touch to your look. A quality and durable construction ensures this piece lasts for years to come.

14kt Gold Tear with Jewel Hinged Ring

Made out of Solid 14kt Gold Nickel Free.

Bar Gauge: 1.2mm / 16GA     Length: 8mm

• Crystal Size: 2.75mm x 1pcs

This 14kt Gold Tear Hinge Ring with Jewel is the perfect accessory for any look. The ring is crafted with care from durable 14kt gold, and features a beautiful and intricate jewel for added sparkle. Feel confident knowing that you are wearing a quality piece of jewelry that will last for many years.

14kt Gold Front Facing Jewel Hinged Ring

Made out of Solid 14kt Gold Nickel Free.

• Crystal Size: 1.0mm x 13pcs

This 14kt Gold Front Facing Jewel Hinge Ring is sure to be a conversation starter. Beautifully crafted with front facing crystals in 14kt solid gold, this stunning accessory is a timeless piece. Enjoy the luxurious look and feel of this modern classic.

14kt Gold Jewel Hinged Ring

Made out of Solid 14kt Gold Nickel Free.

• Crystal Size: 1.0mm x 14pcs

This stunning 14kt gold hinge ring is sure to make a statement. The 14kt gold jewelled design adds sophistication and elegance to any ensemble. The ring is designed to be comfortable and secure, making it perfect for any dress code or occasion.

14kt Gold Double Prong Set Navel Bar

Made out of Solid 14kt Gold Nickel Free.

Bar Gauge: 1.6mm / 14GA     Length: 10mm

• Crystal Size: 4.0mm x 1pcs
• Crystal Size: 6.0mm x 1pcs

This 14kt Gold Navel Bar Double Prong Set is an elegant and timeless piece of body jewelry. Crafted from high-quality gold, the double prong set provides a secure fit and is hypoallergenic. This navel bar is an excellent choice for a touch of luxury.

14kt Gold Heart Prong Set Navel Bar

Made out of Solid 14kt Gold Nickel Free.

Bar Gauge: 1.6mm / 14GA     Length: 10mm

• Crystal Size: 2.5mm x 1pcs
• Heart Size: 6.0mm x 1pcs

This 14kt Gold Navel Bar Heart Prong Set is the perfect addition to any outfit. Crafted from 14kt gold, it guarantees durability and shines for any occasion. Its prong setting ensures strength and shine for a sophisticated look and a heart shaped centerpiece adds a classic touch.

14kt Gold Pear Prong Set Navel Bar

Made out of Solid 14kt Gold Nickel Free.

Bar Gauge: 1.6mm / 14GA     Length: 10mm

• Crystal Size: 2.5mm - 1pcs
• Pear Size: 6.0mm x 4.0mm - 1pcs

This 14kt gold Navel Bar Pear Prong Set will add a touch of luxurious style to your look. Crafted from 14kt gold, this navel piercing features a pear-labelled charm expertly set with a prong setting that will add a classic look to any outfit.

14kt Gold Single Prong Set Navel Bar

Made out of Solid 14kt Gold Nickel Free.

Bar Gauge: 1.6mm / 14GA     Length: 10mm

• Crystal Size: 2.5mm x 1pcs
• Crystal Size: 6.0mm x 1pcs

The 14kt Gold Navel Bar Single Prong Set is a chic and classy choice for navel jewelry. Featuring a single prong design and crafted from a high-polish 14 karat gold finish, this style is ideal for navel piercings and will make any look shine.

14kt Gold Opal Pear Shape Prong Set Navel Bar

Made out of Solid 14kt Gold Nickel Free.

Bar Gauge: 1.6mm / 14GA     Length: 10mm

• Opal Size: 2.5mm x 1pcs
• Opal Size: 7.5mm x 1pcs

This stunning 14kt gold navel bar with opal pear shape prong set is perfect for making a bold statement. The 14kt gold ensures the jewelry is strong and durable. The opal pear shape boosts the beauty of the piece and the prong setting provides a secure fit to your body.

14kt Gold Prong Set Dangle Navel Bar

Made out of Solid 14kt Gold Nickel Free.

Bar Gauge: 1.6mm / 14GA     Length: 10mm

• Crystal Size: 6.0mm - 1pcs
• Crystal Size: 2.5mm - 1pcs
• Prong Size: 5mm x 3mm - 1pcs
  

Crafted with solid 14kt gold, this navel bar prong set dangle offers long-lasting durability and radiant shine. It features a classic design and secure closure for a secure and stylish look.